中文 |ENGLISH
battery charger, car battery charger, lead acid battery charger, lipo charger, li-ion battery charger, nimh battery charger

GaN065-144033 GaN LiFePO4 Charger for 4Cells 12.8V Li-Fe Battery

  • Specification
  • Input: 90~264V
  • Output: 14.4V 3.3A
  • Charge Process: CCã€CV (Two stages)
  • Charger Indicator: Bi-color LED (Red: Charging; Green: Full charge)
  • Output Protections: OVPã€OCPã€Shorted and Reversed
  • Safety Approval: CE FCC
  • Size: 75X43X28.5mm/120g
  • Industry: Electrical Bike,Mobile Lamp
GaN065-144033 GaN LiFePO4 Charger for 4Cells 12.8V Li-Fe Battery

SPECIFICATION(Li-Fe battery charger)

MODEL

GaN065-144033

OUTPUT

Charge voltage  

14.4V±1%

Charge voltage range

10-14.4V

Charge current

3.3A±10%

Pre-charge current 

-

Charge-end current

≤0.33A ±20%

Rated power

47.52W

Recommended battery capacity

 Note.3

5 - 40Ah

Leakage current from battery (Typ.)

≤2mA

CHARGE INDICATOR

LED indication

Red: Charging.   Green: Full or Idle

INPUT

Rated input voltage

100 - 240VAC  50 / 60Hz

Input voltage range      Note.4

90 - 264VAC

Power factor (Typ.)

PF>0. 55@AC100V, full load

Input current (Typ.)

1.2A@100VAC

Inrush current  (Typ.)

Cold start 75A @230VAC

Standby input power

<0.5W

Efficiency (Typ.)

92.5%

PROTECTION

Short circuit             

 Yes

Over voltage

Yes

Reverse polarity

Yes

Over temperature

-

ENVIRONMENT

Working temperature

-10 - +40℃ (Refer to " Derating Curve")

Working humidity

0 - 90% RH

Storage temperature,humidity

-40 - +70℃, 0 - 95% RH

Cooling

Natural   convection

Vibration resistance

10 - 50Hz, 2G 10min. 1cycle, 60min. each along X, Y, Z axes

SAFETY&EMC

(Note.6)

Max. temperature rise

< 40℃ on casing

Hi-Pot Insulation

i/p to o/p: 3000V (1 min)

Safety standards

IEC62368-1

EMC Emission

Parameter

Standard

Test Level I Note

Conducted

EN55032   FCC PART15

Class B

Radiated

EN55032   FCC PART15

Class B

Harmonic Current

EN61000-3-2

.....

Voltage Flicker

EN61000-3-3

.....

EMC IMMUNITY

EN61000-4-2，EN61000-4-3，EN61000-4-4，EN61000-4-5，EN61000-4-6，EN61000-4-8，EN61000-4-11

OTHERS

MTBF

30000H

Dimension

75*43*28.5mm (L*W*H)

Weight

120g

NOTE
  1. 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and Green digital power for details.
  2. 2.All parameters NOT specially mentioned  are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  3. 3.This is Green suggested range. Please consult your battery manufacturer for their suggestions about maximum charging  current limitation.
  4. 4.Derating may be needed under low input voltages. Please check the derating curve for more details.
  5. 5.This protection mechanism is specified for the case the short circuit occurs after the charger is turned on.
  6. 6.The battery charger is considered as an independent unit, but  the final equipment still need to re-confirm that the whole system complies with the EMC directives.
  7. 7.AC Inlet is ICE320-C8, DC cord is 1.5m 2*18AWG wires, DC terminal is defined when order.
Top