battery charger, car battery charger, lead acid battery charger, lipo charger, li-ion battery charger, nimh battery charger

G168-296056 Lead-acid Charger for 24V Pb-Acid/AGM/GEL/VRLA/WET battery

  • Specification
  • Input: 29.6V 5.6A
  • Output: 29.6V 5.6A
  • Charge Process: CCã€CV(H) and CV(L) (Three stages)
  • Charger Indicator: Bi-color LED (Red: Charging; Green: Full charge)
  • Output Protections: OVPã€OCPã€OTPã€Shortedã€Reversed
  • Safety Approval: CE SAA FCC CCC cTUVus CB BS
  • Size: 175 x 72 x 40mm/680g
  • Industry: Security Systemã€Lighting Industry
G168-296056 Lead-acid Charger for 24V Pb-Acid/AGM/GEL/VRLA/WET battery

SPECIFICATION(Lead-Acid battery charger)

MODEL

G168-296056

OUTPUT

Charge voltage (High voltage)  

29.6V±1%

Charge voltage range

20.0-29.6V

Float charge (Low voltage)

27.6V±1%

Charge current

5.6A±7%

Charge-end current

≤1.12A ±10%

Rated power

165.76W

Recommended battery capacity Note.3

30- 60Ah

Leakage current from battery (Typ.)

≤1mA

CHARGING LED

Red LED flashing

2Hz  Error

Green LED flashing

0.45Hz  No batteryï¼›

0.83Hz  <25% Capacityï¼›
1.25Hz  ≥25% Capacityï¼›          

1.66Hz  ≥50% Capacityï¼›
2.5Hz   ≥75% Capacityï¼›              

Green LED on

Full

INPUT

Rated input voltage

100 - 240VAC  50 / 60Hz

Input voltage range Note.4

90 - 264VAC

Power factor (Typ.)

PF>0. 98@Full load,Input:115VAC   ï¼›PF>0. 94 @Full load,Input:230VAC

Input current (Typ.)

2.2A@100VAC   

Inrush current  (Typ.)

Cold start75A @230VAC

Standby input power

<1W

Efficiency (Typ.)

94%

PROTECTION

Short circuit Note.5

Protection type : Shut down output

Over voltage

Protection type : Shut down output

Reverse polarity

Protection type : Shut down output

Over temperature

-

ENVIRONMENT

Working temperature

-10 - +40℃ (Refer to " Derating Curve")

Working humidity

0 - 90% RH

Storage temperature, humidity

-40 - +70℃, 0- 95% RH

Cooling

Natural convection

Vibration resistance

10-50Hz,2G10min.1cycle,60min.eachalongX,Y,Zaxes

SAFETY & EMC

(Note.6)

Max. temperature rise

< 40℃ on casing

Hi-Pot Insulation

i/p to o/p: 3000V (1 min)

Safety approval

CE/PSE/SAA/FCC/CCC/cTUVus/CB/BS

EMC Emission

Parameter

Standard

Test Level I Note

Conducted

EN55032  FCC   PART15

Class B

Radiated

EN55032   FCC  PART15

Class B

Harmonic Current

EN61000-3-2

.....

Voltage Flicker

EN61000-3-3

.....

EMC IMMUNITY

EN61000-4-2,EN61000-4-3,EN61000-4-4,EN61000-4-5,EN61000-4-6,EN61000-4-8,EN61000-4-11

OTHERS

MTBF

30000H

Dimension

175*72*40mm (L*W*H)

Weight

680g

NOTE

  1. 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and Green digital power for details.
  2. 2.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  3. 3.This is Green suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.
  4. 4.Derating may be needed under low input voltages. Please check the derating curve for more details.
  5. 5.This protection mechanism is specified for the case the short circuit occurs after the charger is turned on.
  6. 6.The battery charger is considered as an independent unit, but  the final equipment still need to re-confirm that the whole system complies with the EMC directives.
Top