battery charger, car battery charger, lead acid battery charger, lipo charger, li-ion battery charger, nimh battery charger

P2012-A6 Motorcycle Battery Charger for 6V Lead Acid Battery

  • Specification
  • Input: 100~240V
  • Output: 6.9V 2.0A
  • Charge Process: CC+CVH+CVL(3 Stages mode)
  • Charger Indicator: Bi-color LED, RED/GREEN
  • Output Protections: Short-circuit, Reverse Polarity
  • Safety Approval: CE cTUVus CCC
  • Size: 84 x 45 x 36mm/120g
  • Industry: Remote control、Lighting industry
P2012-A6 Motorcycle Battery Charger for 6V Lead Acid Battery

P2012-A66.9V 2.0A Pb-Acid  Battery Charger

Item Specification Remark
1.Input
Rating input voltage   100~240Vac  50/60Hz  
Input voltage range  90~264Vac   
Rating input current  0.5Arms Input:100V    Output:Full load
Max input power  20W Input:100V    Output:Full load
2.Output
No load output voltage DC6.9V  
Output voltage range DC5.0~7.5V  
Suit with battery type 6V  Pb-Acid  battery  
Charging current  2.0A ±10%  
Charging voltage  CVH DC7.35V ±0.15V  
Floating charge voltage  CVL DC6.8V ±0.1V  
Charge-end current 0.2-0.3A  
Timer  -  
Max output power 14.7W  
Ripple voltage 69mV Full load
Charging LED Red:Charging  
Green:Full charge or idle   
Shorted   Yes  
Reversed Yes  
Efficiency 78% Full load @220V
3.Environment
Operate temperature  -10 ~ +40  
Operate humidity < +90% Relative humidity
Storage temperature  -40 ~ +70  
Storage humidity 0 ~ +95% Relative humidity
Cooling Natural  
Vibration resistance 5MM/50HZ/600S Non-operating condition
Impact resistance 1 meter drop test 3 times Non-operating condition
4.Mechanical
Weight 120g  
Size 84X45X36mm(US),84X45X50mm(VDE) Casing only
Connector Refer to order  
5.Safety 
Max. temperature rise < 40 on casing  
Safety approval CE/cTUVus/CCC  
MTBF 30000H  
ESD 8.0KV  
Hi-Pot Insulation i/p to o/p: 3000V (1 min)  
Top