Industry News
Advantages and disadvantages of electric vehicle batteries (lead-acid batteries, lithium batteries, Ni MH batteries)
There are many kinds of batteries for electric bicycles in the market. In addition to the largest valve regulated lead-acid batteries, nickel hydrogen batteries, nickel cadmium batteries, lithium ion batteries, zinc air batteries and so on. These batteries have their own unique advantages. Next we will recognize the characteristics and functions of each battery separately.
View More
Pulse charger with overcurrent protection function
LTC4052 is a fully integrated pulse charger for single 4.2V lithium ion / lithium polymer batteries. When the input voltage is 5.25V and the 0.8A current is used for fast charging, the power consumption of LTC4052 is about 280mW, while the power consumption of the linear charger solution is as high as 1.8W. Unlike switch capacitors with high efficiency and low heat dissipation using inductors, the LTC4052 is designed with no inductor. The lithium ion / lithium polymer battery charger circuit designed by LTC4052 only accounts for the area of 70mm2 and the height is less than 1.7mm. The 700mA to 2A battery charger is designed. By reducing power to the lowest level, LTC4052 can relax the requirements of the terminal device for thermal design, allow smaller packages, smaller heat dissipation airflow and smaller PCB area, and eliminate hot spots, so that no heat sink or fan is needed.
View More
5 main points of electric vehicle charging
A group of electric vehicle lead-acid batteries can be used for more than 2-3 years in the case of proper charging and normal maintenance. Many users change their products only in 5 months to 1 years, mainly due to improper charging. Therefore, it is very important to master the correct charging method. Remember that the battery is not a bad one, but a bad one.
View More
Lithium electricity demand or super expectation of electric bicycle
There may be areas where demand exceeds expectations for small electric lithium batteries for electric bicycles and electric tools.
View More
How to Recondition an Automotive Lead-acid Battery?
Reconditioning a lead-acid automotive battery prolongs its life, unless it has deteriorated irreversibly.Examine the exterior of the battery closely f
View More
How to Charge a 12-volt car battery?
Charge a 12-volt battery in several different ways:Use your car as a charger, Use a Battery Charger, Use Solar Power. As long as your battery is in go
View More
How to Compare NiMH Battery Charger
The battery types, capacity and charging time are a few important aspects to compare when purchasing NiMH battery chargers
View More
How to Use AA Batteries to Charge NiMH
Look for a similar number on the battery charger, indicating the charge rate. Check the User's Manual of the batteries or charger if you cannot find
View More
How to Care for Nickel-Metal Hydride Batteries
Properly caring for your nickel-metal hydride batteries will help extend the life of your rechargeable batteries
View More
How to Charge a 7.2V NiMH 3300mAh Battery
a 7.2-volt NiMH pack with an endurance of 3,300 mAh consists of six cells.Set the NiMH charger to 7.2 volts.Don't attempt to exceed this, as you will
View More
How to Fast Charge NiMH Batteries?
It is important to purchase a high-quality charger for your NiMH batteries, since poor quality materials can actually shorten the lifespan of your bat
View More
Lead acid battery industry will reopen the imagination of lithium battery.
As the lead-acid battery industry has undergone an unprecedented reorganization, the lithium battery plate, which is regarded as "future energy", has emerged new opportunities.
View More
The effect of overcharge on the performance of the battery
When the battery is full of electricity, it will cause negative capacity to be higher than positive capacity when it continues charging. The gas produced by the positive electrode is combined with the cadmium produced by the negative electrode. In general, the internal pressure of the battery will not increase obviously, but if the charging current is too large or the charging time is too long, the oxygen produced is too late to be consumed, which may cause the rise of the internal pressure, the deformation of the battery, the leakage of liquid and so on. At the same time, its electrical performance will also be significantly reduced.
View More
The effect of overcharge on the performance of the battery
hen the battery is full of electricity, it will cause negative capacity to be higher than positive capacity when it continues charging. The gas produced by the positive electrode is combined with the cadmium produced by the negative electrode. In general, the internal pressure of the battery will not increase obviously
View More
2018 relevant information on Forbes's global rich list
2018, the world's richest list: Ma Huateng became the richest Chinese, sitting on 295 billion yuan!
View More