G168-168100锂电池智能充电器,适用于4节 14.8V锂电池
- 规格参数
- 输入: 100~240V
- 输出: 16.8V 10.0A
- 充电过程: 预充、恒流、恒压和关闭(四段式充电)
- 充电指示: 红绿双色指示(红色:快充;绿色:完成/待机)
- 输出保护: 有过流、过压、短路、反接和温度多重保护
- 安全认证: CE PSE SAA FCC CCC cTUVus CB BS
- 尺寸重量: 175 x 72 x 40mm/680g
- 适用行业范围: 照明工业、电动玩具
G168-168100(16.8V 10.0A)4S Li-ion Battery Charger |
||
项目 Item | 规格 Specification | 备注 Remark |
1.输入特性 Input | ||
额定输入电压 Rating input voltage | 100~240Vac 50/60Hz | |
输入电压范围 Input voltage range | 90~264Vac | |
额定输入电流 Rating input current | 2.2Arms | Input:100V Output:Full load |
功率因素 Power factor | PF>0.98 | Input:115VAC Output:Full load |
PF>0.94 | Input:230VAC Output:Full load | |
待机功效 Standby power | 1W | Input:115VAC&230VAC |
最大输入功率 Max input power | 183W | Input:100V Output:Full load |
2.输出特性 Output | ||
空载输出电压 No load output voltage | DC16.8V ±1% | |
输出电压范围 Output voltage range | DC10.0~16.8V | |
适用电池 Suit with battery type | 4S Li-ion battery | |
恒定电流 Charging current | 10.0A ±7% | |
恒定电压 Charging voltage | DC16.8V ±1% | |
预充电流 Pre-charge | 2A ±7% | 电压≤12.0V预充 |
充电结束电流 Charge-end current | ≤1.0A±10% | |
定时器 Timer | - | |
最大输出功率 Max output power | 168W | |
纹波电压 Ripple voltage | ≤200mV | 满载 Full load |
充电指示灯 Charging LED | 红灯闪Red LED flashing | 2Hz Error |
绿灯闪Green LED flashing |
0.45Hz 空载No battery; 0.83Hz <25% Capacity; 1.66Hz ≥50% Capacity; |
|
绿灯常亮 Green LED on | 充满Full | |
输出短路保护 Shorted | 有Yes | |
输出反接保护 Reversed | 有Yes | |
效率 Efficiency | ≥94% | 满载 Full load @220V |
3.环境要求 Environment | ||
工作温度 Operate temperature | -10 ~ +40℃ | |
工作湿度 Operate humidity | < +90% | 相对湿度 Relative humidity |
存储温度 Storage temperature | -40 ~ +70℃ | |
存储湿度 Storage humidity | 0 ~ +95% | 相对湿度 Relative humidity |
冷却方式 Cooling | 自然冷却 Natural | |
抗振动 Vibration resistance | 5MM/50HZ/600S | 非运行状况 Non-operating condition |
抗冲击 Impact resistance | 1 meter drop test 3 times | 非运行状况 Non-operating condition |
4.结构 Mechanical | ||
重量 Weight | 680g | |
尺寸 Size | 175X72X40MM | 外壳尺寸Casing only |
接线端子 Connector | 按客户要求制定 Refer to order | |
5.安全特性 Safety | ||
最大温升 Max. temperature rise | < 40℃ on casing | |
安全认证 Safety approval | CE/PSE/SAA/FCC/CCC/cTUVus/CB/BS | |
平均无故障时间 MTBF | 30000H | |
静电等级 ESD | 8.0KV | |
隔离耐电压 Hi-Pot Insulation | i/p to o/p: 3000V (1 min) |