电池充电器,智能充电器,锂电池充电器,蓄电池充电器,充电器厂家

A500-36 智能铅酸电池充电器,适用于36V铅酸蓄电池

  • 规格参数
  • 输入: 100~240V
  • 输出: 41.4V 11A
  • 充电过程: 恒流、高恒压、低恒压(三段式充电)
  • 充电指示: 红绿双色指示(红色:快充;绿色:完成/待机)
  • 输出保护: 有过流、过压、短路、反接和温度多重保护
  • 安全认证: CE PSE
  • 尺寸重量: 250 x 125 x 72mm ( (金属铝壳))/1.2kg
  • 适用行业范围: 照明工业、电动玩具
A500-36 智能铅酸电池充电器,适用于36V铅酸蓄电池

A500-3641.4V 11.0APb-Acid Battery Charger

项目 Item 规格 Specification 备注 Remark
1.输入特性 Input
额定输入电压 Rating input voltage   100~240Vac  50/60Hz  
输入电压范围 Input voltage range  90~264Vac   
额定输入电流 Rating input current  5.5Arms Input:100V    Output:Full load
最大输入功率 Max input power  550W Input:100V    Output:Full load
2.输出特性 Output
空载输出电压 No load output voltage DC2.2V  
输出电压范围 Output voltage range DC30.0~44.1V  
适用电池 Suit with battery type 36V Pb-Acid battery  
恒定电流 Charging current  11.0A ±10%  
恒定电压 Charging voltage CVH DC44.1V ±1%  
浮充电压 Floating charge voltage CVL DC41.4V ±1%  
充电结束电流 Charge-end current ≤0.4-1.0A  
定时器 Timer 电池电压>42V后,定时5小时  
最大输出功率 Max output power 485.1W  
纹波电压 Ripple voltage 441mV 满载 Full load
充电指示灯 Charging LED 红色Red:Charging  
绿色Green:Full charge or idle   
输出短路保护 Shorted   Yes  
输出反接保护 Reversed Yes  
效率 Efficiency ≥88% 满载 Full load @220V
3.环境要求 Environment
工作温度 Operate temperature  -10 ~ +40  
工作湿度 Operate humidity < +90% 相对湿度 Relative humidity
存储温度 Storage temperature  -40 ~ +70  
存储湿度 Storage humidity 0 ~ +95% 相对湿度 Relative humidity
冷却方式 Cooling 自然冷却 Natural  
抗振动 Vibration resistance 5MM/50HZ/600S 非运行状况 Non-operating condition
抗冲击 Impact resistance 1 meter drop test 3 times 非运行状况 Non-operating condition
4.结构 Mechanical
重量 Weight 1.2Kg  
尺寸 Size 250X125X72MM 外壳尺寸Casing only
接线端子 Connector 按客户要求制定 Refer to order  
5.安全特性 Safety 
最大温升 Max. temperature rise < 40 on casing  
安全认证 Safety approval CE/PSE  
平均无故障时间 MTBF 30000H  
静电等级 ESD 8.0KV  
隔离耐电压 Hi-Pot Insulation i/p to o/p: 3000V (1 min)  
返回
顶部